G-H-I

Front Spring Clamp w/ Bump Stop

The spring clamp design makes shimming for different numbers of leaves simpler. The bottom plate is easily removed and and changing out the bolts when a shorter clamp is needed is much easier than modifying U-bolts. The clamp comes with an aluminum...

Speedshocks, Standard, Chrome

These nitrogen filled gas shocks are engineered specifically for hot rod applications and offered in the “Standard” length of 9 1/4" closed and 14 1/4" extended. They are manufactured without dust covers and can be run on the front or rear...

Brake Pedal, Plain

The pedal combination is designed for the Step-Boxed manual transmission frames but other applications apply. They offer the correct leverage for easy operation and the threaded end accepts the stock Ford style pedal pad...

9" Ford Rear Panhard Bar Kit w/ Frame Tabs

Rear panhard bars are not only a must on coil-over but 'A' 40's style buggy spring rear suspensions as well. The kit stabilizes the inherent problem of lateral movement in early Ford type spring shackles and/or coil-over shocks...

GT2 Pitman Arm, Polished

This beautifully styles and superbly engineered Vega pitman arm is constructed of investment cast 17-4 stainless steel and fits the sector shaft spline perfectly. The tie rod end hook-up point is tapered from the top side only and the arm comes in a...

Model 'A' Rear U-Bolt Kit

This kit is a direct replacement for '28 to '31 Model 'A' Ford stock rear crossmembers. It has a fabricated steel base plate, 9/16-18 threaded mild steel u-bolts and nylon lock nuts.      WARNING Cancer and Reproductive...

Steering Stabilizer, Chrome

This stabilizer improves steering smoothness and eliminates the possibility of shimmy, which is inherent in early Fords designed to travel at much lower speeds than we see on today's highways. The stabilizer is now offered in show quality chrome and...

Alternator Bracket, Chrome

This effective, single use bracket mounts a standard GM alternator to the passenger side of a small block Chevy. The bracket is offered in a chrome finish.        WARNING Cancer and Reproductive Harm: https://www...

HushMat 10 Sq Ft Ultra Sound Deadening & Thermal Insulation Door Kit - Black Foil

GT Performance GT3 Classic Hole Spokes Foam Wheel, Black

GT3 Classic Wheel, Foam, Hole Spokes, Black Model: 14-4311 Shown with Model: 21-1524 horn button (sold separately). The GT Classic pays tribute to a timeless performance design and elevates it to the next level which provides the look, feel and vibe of...

Master Cylinder

This 15/16" bore dual master cylinder fits the Step-Boxed frame as well as most other chassis.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

GT2 Front Spring Perches, Plain

This spring perch design is the industry standard as it closely replicates the original Ford part manufactured between 1928 and 1934. This is what hard core builders use when creating traditional hot rods. They feature S/S construction, 3/4" I.D. bushing...

Rear Shackles, Polished

These shackles are designed to work with original Ford and aftermarket rear springs and hangers. They feature urethane bushings, lock nuts and are finished in polished stainless steel.        WARNING Cancer and...

Holley Water Neck - GM LS - Swivel - 30 Degree Angle, Chrome

Swivel Water Neck - Chevrolet, GM & GMC LS/Vortec V-8 engines. Water outlet rotates 360 degrees. Designed to work with 1997-2009 GM LS Engines Great for engine conversion applications where engine/radiator inlet and outlet ports may be in different...

GT Performance GT3 Low Profile V8 Emblem Engraved with Spacer Horn Button, Polished

GT3 Horn Button, Low Profile, V8 Emblem Engraved with Spacer Model: 11-2003 This engraved V8 emblem horn button features an elegant polished smooth surface. Low Profile Horn Buttons are designed for Flat or Shallow dished wheels. It comes with a...

Front Brake Lines

These braided stainless brake lines are covered with black vinyl to give them a traditional appearance. They are 22" long and feature a 3/16-inch inverted flare and 1/8-inch pipe fittings. Sold in pairs.      WARNING Cancer and...

Hazard/Indicator Switch w/ Dress-up Knobs

This is a great chrome plated, traditional-style indicator switch that easily clamps to the steering column. Included is a hazard warning function. We've also added some cool, Art Deco-style knobs to both levers.          ...

1942-48 Car & 1948-52 Pickup Steel King Pin Kit

The standard steel kit fits stock '42-'48 Ford Car/'48-'52 Ford Truck and replacement aftermarket spindles. It includes the kingpins, bearings, keepers, bushings, shims, seals and fasteners.              www...

1937-41 Steel King Pin Kit

The standard steel kit fits stock '37 to '41 Ford and replacement aftermarket spindles. It includes the kinpins, bearings, keepers, bushings, shims, seals and fasteners.              www.P65Warnings.ca...

Speedshocks, Shorty, Covered, Black

These nitrogen filled gas shocks are engineered specifically for hot rod applications and offered in the "Shorty" length of 7 7/8" closed and 11 1/4" extended. They are manufactured with dust covers and can be run on the front or rear end of the car in...