Brands

Quik-Latch Air Cleaner Mini Latch

The Quik-Latch air cleaner mini latch comes with a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4" x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch...

Quik-Latch Air Cleaner Mini Latch, Black Anodized

The Quik-Latch air cleaner mini latch comes with a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4" x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch...

Quik-Latch Air Cleaner Mini Latch, Polished

The Quik-Latch air cleaner mini latch comes with a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4" x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch...

Quik-Latch Mini Latch Spring Assist

The Quik-Latch mini latch assist spring is placed over the mini latch mounting stud and rests against the nut which is threaded onto the mounting stud. A retainer is placed over the ball stud, which keeps the spring from coming out of place. More...

Quik-Latch Mini Latch, Black Anodized

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch Mini Latch, Brushed Aluminum

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch Mini Latch, Polished

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch QL-38 Series Hood Pin Kit

The 38 series hood pin kits deliver the same push button function that you've come to expect from Quik-Latch Products while retaining serious holding ability that is required of hood pins. The reduced phyiscal presence of the 38 series hood pin kits...

Quik-Latch QL-50 Series Low Profile Hood Pin Kit

Each Quik-Latch Low Profile Hood Pin set comes equipped with: Installation instructions Two latch mechanisms Two retaining rings Four 1/2" x 20 stainless steel nuts Four 1/2" stainless steel washers Two 1/2" x 20 mounting pins  Four 10x32x1”...

Rear Clevis, 7/16"

Polished Stainless Steel, 5/8"-18 male shank with a 7/16" hole. Clevises have a 3/8" slot and jam nut.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear End Breather

This CNC machined and fully polished S/S component is a direct replacement for the 9" Ford rear end breather. It has a 7/16-20 mounting thread.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear Housing Breather

This gold cad iridite plated steel breather uses a hose design to relieve housing pressure and has a 7/16"-20 male thread.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear Shackles, Polished

These shackles are designed to work with original Ford and aftermarket rear springs and hangers. They feature urethane bushings, lock nuts and are finished in polished stainless steel.        WARNING Cancer and...

Rear Shock Mounting Studs

A shock stud that allows ample clearance between the shock, especially covered shocks and the rear end housing. They come complete with hardware. Sold in pairs. NOTE: Do not use with coil-over shocks.

Return Brake Spring with Mounting Tab Bracket

Return Brake Spring with Mounting Tab Bracket 304 Stainless Steel Spring satin finish with (2) 304 High Polished Stainless Steel mounting Tab Brackets Hole 3/8" and 9/16" plus  spring hole. Highly recommended on vehicles not relying on that very...

Ridetech 4Link ShockWave/Coil-Over Mounting Kit

Includes billet shock mounts and weld-in upper cross-member. Does NOT include ShockWaves or Coil-Overs. If you have not designed your own cross-member kit, you will need this kit to mount your 4-Link ShockWaves or Coil-Overs.      ...

Ridetech Billet Locking Gas Cap for 1967-1968 Camaro

• Direct fit for 1967 & 1968 Camaro – no modifications necessary • Billet aluminum construction • OEM quality fit and sealing • Clear anodized finish • Locking cap with 2 keys included •...

Ridetech Billet Locking Gas Cap kit for 1966-1967 Nova

• Direct fit for 1966 & 1967 Nova – no modifications necessary • Billet aluminum construction • OEM quality fit and sealing • Clear anodized finish • Locking cap with 2 keys included •...

Ridetech Gas Cap Vent Kit for Billet Locking Gas Cap

A vent kit for the Ridetech Billet Aluminum Gas Cap. Ridetech components are built to last, and we put them on our cars as proof of that.  *depending on fuel system type and gas tank type, this optional vent kit may be required...

Ridetech HQ Series Shock Absorbers

      Designed to replace OEM Shock Absorbers. Sold IndividuallyShocks are the BRAINS of your suspension! Nothing influences how your car rides and handles more than shock absorbers. If you could pick only one thing to change on your...