Brands

Vintage Air Standard #10 Refridgerant Hose

Standard Vintage Air Refrigerant Hose 1/2 Inch I D - 1 Inch O D Discharge Hose: Compressor to Condenser - Sold in 9ft.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Vintage Air Standard #6 Refridgerant Hose

Standard Vintage Air Refrigerant Hose 5/16 Inch I D - 3/4 Inch O D Liquid Hose: Condenser to Drier to Evaporator - Sold in 10ft      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Vintage Air Standard #8 Refridgerant Hose

Standard Vintage Air Refrigerant Hose 13/32 Inch ID - 29/32 Inch OD Discharge Hose: Compressor to Condenser - Sold in 6ft.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Vintage Air Standard Adjustable Double Vane Louver for 2.5" Hose, Black w/ Chrome Bezel

This adjustable through dash louver has a 2.5-inch duct hose inlet and a 2.70-inch bezel diameter. The louver is black with a chrome bezel and features the capability to open close and rotate 360-degrees.            ...

Vintage Air Standard Drier Mounting Bracket

Standard drier mounting bracket - two required for proper use.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Vintage Air Standard Drier w/ Binary Switch & Mounting Hardware, Black

This standard drier is painted black and includes a binary safety switch along with all necessary mounting hardware. Dimensions are 2.5 x 6. No adapter needed.            www.P65Warnings.ca.gov      

Vintage Air Standard Drier w/ Trinary Switch & Mounting Hardware, Black

This standard drier is painted black and includes a trinary safety switch along with all necessary mounting hardware. Dimensions are 2.5 x 6". No adapter needed.            www.P65Warnings.ca.gov      

Vintage Air Standard Drier, Black

This economical drier is painted black and has a threaded port for trinary or binary switch installation. Comes sealed and pre-charged with nitrogen. Dimensions are 2.5 x 6. Brackets sold separately.             ...

Vintage Air Standard Heater Beadlock Fitting, 45 Degree 5/8" Heater Hose

Vintage Air Standard Heater Beadlock Fitting - 45 Degree 5/8" Hose Fitting            www.P65Warnings.ca.gov      

Vintage Air Standard Heater Beadlock Fitting, 90 Degree 5/8" Heater Hose

Vintage Air Standard Heater Beadlock Fitting - 90 Degree 5/8" Heater Hose Fitting            www.P65Warnings.ca.gov      

Vintage Air Standard Heater Beadlock Fitting, Straight #10 Hose Fitting

Vintage Air Standard Heater Beadlock Fitting - Straight NO 10 Hose Fitting            www.P65Warnings.ca.gov      

Vintage Air Standard Series Double Vane Louver for 2.5" Hose, Chrome

This all chrome through dash louver has a 2.5-inch duct hose inlet and a 2.70-inch bezel diameter.              www.P65Warnings.ca.gov      

Vintage Air Standard Series Louver for 2.5" Hose, Black Finish

This all black through dash louver has a 2.5-inch duct hose inlet and a 2.70-inch bezel diameter.            www.P65Warnings.ca.gov      

Vintage Air Standard Series Louver for 2.5" Hose, Chrome Finish

This all chrome through dash louver has a 2.5-inch duct hose inlet and a 2.70-inch bezel diameter.            www.P65Warnings.ca.gov      

Vintage Air Standard Series Louver for 2.5" Hose, Chrome w/ Black Bezel

This through dash louver has a 2.5-inch duct hose inlet and a 2.70-inch bezel diameter. Louver is chrome with a black bezel.              www.P65Warnings.ca.gov      

Vintage Air Standard Slide Knob for Gen II Heat Control

Replacement black standard slide knob for Gen II heat control.            www.P65Warnings.ca.gov      

Vintage Air Steel-eez Side-Mount Bracket Long Pump Alternator

Steel-eez Side-Mount Bracket Long Pump Alternator Only (driver side)Mounts compressor and alternator. Designed for low hood clearance applications. Will fit Chevy cylinder heads without bolt holes. Bolts to water pump and exhaust manifold...

Vintage Air Steel-eez Side-Mount Bracket Long Pump Compressor

Steel-eez Side-Mount Bracket Long Pump Compressor Only (passenger side)Mounts compressor and alternator. Designed for low hood clearance applications. Will fit Chevy cylinder heads without bolt holes. Bolts to water pump and exhaust manifold...

Vintage Air Steel-eez Side-Mount Bracket Long Water Pump Compressor

Steel-eez Side-Mount Bracket Long Pump Compressor Only (driver side)Mounts compressor and alternator. Designed for low hood clearance applications. Will fit Chevy cylinder heads without bolt holes. Bolts to water pump and exhaust manifold...

Vintage Air Steel-eez Side-Mount Bracket Short Water Pump Compressor

Steel-eez Side-Mount Bracket Short Pump Compressor Only (passenger side)Mounts compressor and alternator. Designed for low hood clearance applications. Will fit Chevy cylinder heads without bolt holes. Bolts to water pump and exhaust manifold...