Brands

Quik-Latch Air Cleaner Mini Latch, Polished

The Quik-Latch air cleaner mini latch comes with a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4" x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch...

Quik-Latch Mini Latch Spring Assist

The Quik-Latch mini latch assist spring is placed over the mini latch mounting stud and rests against the nut which is threaded onto the mounting stud. A retainer is placed over the ball stud, which keeps the spring from coming out of place. More...

Quik-Latch Mini Latch, Black Anodized

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch Mini Latch, Brushed Aluminum

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch Mini Latch, Polished

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch QL-38 Series Hood Pin Kit

The 38 series hood pin kits deliver the same push button function that you've come to expect from Quik-Latch Products while retaining serious holding ability that is required of hood pins. The reduced phyiscal presence of the 38 series hood pin kits...

Quik-Latch QL-50 Series Low Profile Hood Pin Kit

Each Quik-Latch Low Profile Hood Pin set comes equipped with: Installation instructions Two latch mechanisms Two retaining rings Four 1/2" x 20 stainless steel nuts Four 1/2" stainless steel washers Two 1/2" x 20 mounting pins  Four 10x32x1”...

Rear Clevis, 7/16"

Polished Stainless Steel, 5/8"-18 male shank with a 7/16" hole. Clevises have a 3/8" slot and jam nut.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear End Breather

This CNC machined and fully polished S/S component is a direct replacement for the 9" Ford rear end breather. It has a 7/16-20 mounting thread.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear Housing Breather

This gold cad iridite plated steel breather uses a hose design to relieve housing pressure and has a 7/16"-20 male thread.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear Shackles, Polished

These shackles are designed to work with original Ford and aftermarket rear springs and hangers. They feature urethane bushings, lock nuts and are finished in polished stainless steel.        WARNING Cancer and...

Rear Shock Mounting Studs

A shock stud that allows ample clearance between the shock, especially covered shocks and the rear end housing. They come complete with hardware. Sold in pairs. NOTE: Do not use with coil-over shocks.