Brands

Quik-Latch Air Cleaner Mini Latch

The Quik-Latch air cleaner mini latch comes with a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4" x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch...

Quik-Latch Air Cleaner Mini Latch, Black Anodized

The Quik-Latch air cleaner mini latch comes with a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4" x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch...

Quik-Latch Air Cleaner Mini Latch, Polished

The Quik-Latch air cleaner mini latch comes with a stud length of 4.10 inches (10.4 centimeters) and a thread pitch of 1/4" x 20, the air cleaner mini has enough reach to be successfully adapted to most carburetor air cleaner housings. Each Quik-Latch...

Quik-Latch Mini Latch Spring Assist

The Quik-Latch mini latch assist spring is placed over the mini latch mounting stud and rests against the nut which is threaded onto the mounting stud. A retainer is placed over the ball stud, which keeps the spring from coming out of place. More...

Quik-Latch Mini Latch, Black Anodized

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch Mini Latch, Brushed Aluminum

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch Mini Latch, Polished

The Quik-Latch mini latch is a push button latch roughly larger in diameter than a quarter. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds before experiencing failure. The latches have been approved by the...

Quik-Latch QL-38 Series Hood Pin Kit

The 38 series hood pin kits deliver the same push button function that you've come to expect from Quik-Latch Products while retaining serious holding ability that is required of hood pins. The reduced phyiscal presence of the 38 series hood pin kits...

Quik-Latch QL-50 Series Low Profile Hood Pin Kit

Each Quik-Latch Low Profile Hood Pin set comes equipped with: Installation instructions Two latch mechanisms Two retaining rings Four 1/2" x 20 stainless steel nuts Four 1/2" stainless steel washers Two 1/2" x 20 mounting pins  Four 10x32x1”...

Rear Clevis, 7/16"

Polished Stainless Steel, 5/8"-18 male shank with a 7/16" hole. Clevises have a 3/8" slot and jam nut.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear End Breather

This CNC machined and fully polished S/S component is a direct replacement for the 9" Ford rear end breather. It has a 7/16-20 mounting thread.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/

Rear Housing Breather

This gold cad iridite plated steel breather uses a hose design to relieve housing pressure and has a 7/16"-20 male thread.      WARNING Cancer and Reproductive Harm: https://www.p65warnings.ca.gov/